Netgear WNR2000-200UKS User Manual download pdf (Page 91)

Specify Internet Port Settings

N300 WiFi Router

Set Up Port Forwarding to a Local Server

If you have a server in your home network, you can allow certain types of incoming traffic to

reach the server. For example, you might want to make a local web server, FTP server, or

game server visible and available to the Internet.

The router can forward incoming traffic with specific protocols to computers on your local

network.

You can specify the servers for applications and you can also specify a default DMZ

server to which the router forwards all other incoming protocols.

 To forward specific incoming protocols:

1. Decide which type of service, application, or game you want to provide.

2. Find the local IP address of the computer on your network that will provide the service.

The server computer must always have the same IP address. To specify this setting, use

the reserved IP address feature. See Reserve LAN IP Addresses on page 60.

3. Launch a web browser from a computer or wireless device that is connected to the network.

4. T

ype www.routerlogin.net or www.routerlogin.com.

A login screen displays.

5. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

6. Select ADV

ANCED > Advanced Setup > Port Forwarding/Port Triggering.

7. Leave the Port Forwarding radio button selected as the service type.

8. In the Service Name list, select the service name.

If the service that you want to add is not in the list, create a custom service. See Add a

Custom Port Forwarding Service on page 92.

9. In the Server IP

Address field, enter the IP address of the computer that will provide the

service.

10. Click the Add button.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 91