Netgear WNR2000-200UKS User Manual download pdf (Page 31)

Specify Initial Settings

N300 WiFi Router

2. In the address field of the web browser, enter www.routerlogin.net or

www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Setup > WAN Setup.

5. In the MTU Size field, enter a value from 64 to 1500.

6. Click the Apply button.

Your change is saved.

If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are

willing to experiment, you can gradually reduce the MTU from the maximum value of 1500

until the problem goes away

. The following table describes common MTU sizes and

applications.

Table 2. Common MTU sizes

MTU Application

1500 The largest Ethernet packet size. This setting is typical for connections that do not use

PPPoE or VPN and is the default value for NETGEAR routers, adapters, and switches.

1492 Used in PPPoE environments.

1472 Maximum size to use for pinging. (Larger packets are fragmented.)

1468 Used in some DHCP environments.

1460 Usable by AOL if you do not have large email attachments, for example.

1436 Used in PPTP environments or with VPN.

1400 Maximum size for AOL DSL.

576 Typical value to connect to dial-up ISPs.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 31