Netgear WNR2000-200UKS User Manual download pdf (Page 63)

Specify Network Settings

N300 WiFi Router

7. Within two minutes, go to the client device and use its WPS software to connect to the WiFi

network.

The WPS process automatically sets up your wireless computer with the network

password when it connects. The router WPS screen displays a confirmation message.

Specify Basic WiFi Settings

The router comes with preset security. This means that the WiFi network name (SSID),

network key (password), and security option (encryption protocol) are preset in the factory.

You can find the preset SSID and password on the router label. The preset SSID and

password are uniquely generated for every device to maximize your wireless security.

NETGEAR recommends that you do not change your preset security settings. If you change

your preset security settings, make a note of the new settings and store the note in a safe

place where you can easily find it.

If you use a wireless computer to change the SSID or other wireless security settings, you

are disconnected when you click the Apply button. To avoid this problem, use a computer with

a wired connection to access the router.

 To specify basic wireless settings:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. In the address field of the web browser, enter www.routerlogin.net or

www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 63