Netgear WNR2000-200UKS User Manual download pdf (Page 86)

Manage Your Network

N300 WiFi Router

WARNING:

Do not interrupt the reboot process.

Erase the Current Configuration Settings

You can erase the current configuration and restore the factory default settings. You might

want to do this if you move the router to a different network. (For more information, see

Factory Settings on page 111.)

 To erase the configuration settings:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. In the address field of the web browser, enter www.routerlogin.net or

www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADVANCED > Administration > Backup Settings.

The Backup Settings screen displays.

5. Click the Erase button.

6. Click the Yes button to confirm.

The factory default settings are restored. The user name is admin, the password is password,

and the LAN IP address is 192.168.1.1. DHCP is enabled.

Change the admin Password

You can the default password that is used to log in to the router with the user name admin. If

you change this password, NETGEAR recommends that you enable password recovery.

Password recovery allows you to recover a forgotten password.

Note: This password is not the one that you use for WiFi access. The label

on your router shows your unique wireless network name (SSID) and

password for wireless access.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 86