Netgear WNR2000-200UKS User Manual download pdf (Page 64)

Specify Network Settings

N300 WiFi Router

4. Select Wireless.

5. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.

When this check box is selected, the router broadcasts its network name (SSID) so that it

displays when you scan for local WiFi networks on your computer or wireless device.

6. T

o change the SSID, type a new name in the Name (SSID) field.

The name can be up to 32 characters long and is case-sensitive. The default SSID is

randomly generated and is on the router’s

label. If you change the name, make sure to

write down the new name and keep it in a safe place.

7. In the Region list, select your region.

In some locations, you cannot change this setting.

8. T

o change the wireless channel, select a number in the Channel list.

In some regions, not all channels are available. Do not change the channel unless you

experience interference (shown by lost connections or slow data transfers). If this

happens, experiment with dif

ferent channels to see which is the best.

When you use multiple access points, it is better if adjacent access points use different

channels to reduce interference. NETGEAR recommends channel spacing between

adjacent access points of four channels (for example, use Channels 1 and 5, or 6 and

10).

9. T

o change the mode, select it from the Mode list.

• Up to 150 Mbps.

This is the default setting, which allows 802.11n and 802.11g

wireless devices to join the network.

• g & b. This

setting supports up to 54 Mbps. The

• 300-Mbps.

This setting allows 802.11n devices to connect at this speed.

10. Click the Apply button.

Your settings are saved.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 64