Netgear WNR2000-200UKS User Manual download pdf (Page 22)

Specify Initial Settings

N300 WiFi Router

Use Auto Config for an IPv6 Internet Connection

 To set up an IPv6 Internet connection through auto configuration:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. In the address field of the web browser

, enter www.routerlogin.net or

www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > IPv6.

The IPv6 screen displays.

5. In the Internet Connection T

ype list, select Auto Config.

The screen adjusts:

The router automatically detects the information in the following fields:

• Router

’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the length

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

• Router

’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. (Optional) In the DHCP User Class (If Required) field, enter a host name.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 112 113

No comments

Netgear WNR2000-200UKS User Manual Page 22