Netgear R6220 User Manual Page 127

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 126
Network Settings
127
AC1200 Smart WiFi Router with External Antennas
The BASIC Home screen displays.
5. Select ADV
ANCED > Advanced Setup > Wireless AP.
6. Select the Enable Access Point Mode check box.
7. Scroll down and select an IP address setting:
Get dynamically from existing router. The other router on the network assigns an
IP address to this router while this router is in AP mode.
Enable fixed IP settings on this device (not recommended). Use this setting if you
want to manually assign a specific IP address to this router while it is in
AP mode.
Using this option effectively requires advanced network experience.
Note: To avoid interference with other routers or gateways in your network,
NETGEAR recommends that you use different wireless settings on
each router. You can also turn off the wireless radio on the other router
or gateway and use the R6220 router only for wireless client access.
8. Click the Apply button.
The IP address of the router changes, and you are disconnected.
9. T
o reconnect, close and restart your browser and type http://www.routerlogin.net.
Page view 126
1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 159 160

Comments to this Manuals

No comments