Netgear R6220 User Manual download pdf (Page 100)

Manage Your Network

100

AC1200 Smart WiFi Router with External Antennas

• The Gateway IP Address field specifies that all traffic for these addresses will be

forwarded to the ISDN router at 192.168.1.100.

• A metric value of 1 works because the ISDN router is on the LAN.

• The Private check box is selected only as a precautionary security measure in case RIP

is activated.

Set Up a Static Route

 To set up a static route:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. T

ype http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin.

The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

4. Select ADV

ANCED > Advanced Setup > Static Routes.

The Static Routes screen displays.

5. Click the Add button.

6. In the Route Name field, type a name for this static route (for identification purposes only).

7. Select the Private check box if you want to limit access to the LAN only

If the Private check box is selected, the static route is not reported in RIP

8. Select the Active check box to make this route ef

fective.

9. T

ype the IP address of the final destination.

10. T

ype the IP subnet mask for this destination.

If the destination is a single host, type 255.255.255.255.

11. T

ype the gateway IP address, which must be on the same LAN segment as the router.

12. T

ype a number from 1 through 15 as the metric value.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 159 160

No comments

Netgear R6220 User Manual Page 100