Netgear R6220 User Manual download pdf (Page 119)

Network Settings

119

AC1200 Smart WiFi Router with External Antennas

If you connected wirelessly to the network and you changed the SSID, you are

disconnected from the network.

10. Make sure that you can connect wirelessly to the network with its new settings.

If you cannot connect wirelessly, check the following:

• Is your computer or wireless device connected to another wireless network in your

area? Some wireless devices automatically connect to the first open network without

wireless security that they discover.

• Is your computer or wireless device trying to connect to your network with its old

settings (before you changed the settings)? If so, update the wireless network

selection in your computer or wireless device to match the current settings for your

network.

Change the WiFi Mbps Settings

The data rate for high-speed transmissions is commonly measured in megabits per second

(Mbps). By default, the router is set to operate at up to 600 Mbps in the 2.4 GHz WiFi band

and up to 1,733 Mbps in the 5 GHz WiFi band. You can select slower settings.

 To change the WiFi Mbps settings:

1. Launch a web browser from a computer or wireless device that is connected to the

network.

2. Type http://www.routerlogin.net or http://www.routerlogin.com.

A login screen displays.

3. Enter the router user name and password.

The user name is admin. The default password is password. The user name and

password are case-sensitive.

The BASIC Home screen displays.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 159 160

No comments

Netgear R6220 User Manual Page 119