Netgear R6220 User Manual download pdf (Page 29)

Specify Your Internet Settings

AC1200 Smart WiFi Router with External Antennas

5. In the Internet Connection Type list, select 6to4 Tunnel.

The router automatically detects the information in the Router’s IPv6 Address on LAN

field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The

number after the slash (/) is the length of the prefix, which is also indicated by the

underline (_) under the IPv6 address. If no address is acquired, the field displays Not

Available.

6. Select a Remote 6to4 Relay Router radio button:

• Auto.

Your router uses any remote relay router that is available on the Internet. This

is the default setting.

• Static IP

Address. Enter the static IPv4 address of the remote relay router. Your IPv6

ISP usually provides this address.

7. Select

an IP Address Assignment radio button:

• Use DHCP Server.

This method passes more information to LAN devices but some

IPv6 systems might not support the DHCv6 client function.

• Auto Config.

This is the default setting.

This setting specifies how the router assigns IPv6 addresses to the devices on your home

network (the LAN).

8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be

used for the IPv6 address of the router’

s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC

address.

9. Click the Apply button.

Your settings are saved.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 159 160

No comments

Netgear R6220 User Manual Page 29