Netgear R6220 User Manual download pdf (Page 34)

Specify Your Internet Settings

AC1200 Smart WiFi Router with External Antennas

5. In the Internet Connection Type list, select PPPoE.

The router automatically detects the information in the following fields:

• Router

’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired

for the router’s WAN (or Internet) interface. The number after the slash (/) is the length

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no

address is acquired, the field displays Not Available.

• Router

’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired

for the router’s LAN interface. The number after the slash (/) is the length of the prefix,

which is also indicated by the underline (_) under the IPv6 address. If no address is

acquired, the field displays Not Available.

6. In the Login field, enter the login information for the ISP connection.

This is usually the name that you use in your email address. For example, if your main

mail account is JerAB@ISP

.com, you would type JerAB in this field. Some ISPs (like

Mindspring, Earthlink, and T-DSL) require that you use your full email address when you

7. In the Password field, enter the password for the ISP connection.

8. In the Service Name field, enter a service name.

If your ISP did not provide a service name, leave this field blank.

Note: The default setting of the Connection Mode list is Always On to

provide a steady IPv6 connection. The router never terminates the

connection. If the connection is terminated, for example, when the

modem is turned off, the router attempts to reestablish the connection

immediately after the PPPoE connection becomes available again.

9. Select an IP

Address Assignment radio button:

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 159 160

No comments

Netgear R6220 User Manual Page 34