Netgear FVS114 User Manual download pdf (Page 122)

Reference Manual for the ProSafe VPN Firewall FVS114

7-6 Maintenance

202-10098-01, April 2005

Figure 7-5: Router Upgrade menu

To upload new firmware:

1. Download and unzip the new software file from NETGEAR.

2. In the Router Upgrade menu, click the Browse button and browse to the location of the binary

(.BIN) upgrade file

3. Click Upload.

Note: When uploading software to the FVS114 VPN Firewall, it is important not to interrupt

the Web browser by closing the window, clicking a link, or loading a new page. If the browser

is interrupted, it may corrupt the software. When the upload is complete, your firewall will

automatically restart. The upgrade process will typically take about one minute.

In some cases, you may need to reconfigure the firewall after upgrading.

Configuration File Management

The configuration settings of the FVS114 VPN Firewall are stored within the firewall in a

configuration file. This file can be saved (backed up) to a user’s PC, retrieved (restored) from the

user’s PC, or cleared to factory default settings.

From the main menu of the browser interface, under the Maintenance heading, select the Settings

Backup heading to bring up the menu shown below.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 211 212

No comments

Netgear FVS114 User Manual Page 122