Netgear FVS114 User Manual download pdf (Page 28)

Reference Manual for the ProSafe VPN Firewall FVS114

3-4 Connecting the Firewall to the Internet

202-10098-01, April 2005

Figure 3-4: Status lights

Check the VPN firewall router status lights to verify the following:

• PWR: The power light should turn solid green. If it does not, see “Troubleshooting

Tips” on page 3-6.

• TEST: The test light blinks when the firewall is first turned on then goes off. If after

two minutes it is still on, see “Troubleshooting Tips” on page 3-6.

• INTERNET: The Internet LINK/ACT light should be lit. If not, make sure the Ethernet

cable is securely attached to the VPN firewall router Internet port and the modem, and

the modem is powered on.

• LOCAL: A LOCAL light should be lit. Green on the 100 line indicates your computer

is communicating at 100 Mbps; off on the 100 line indicates 10 Mbps. If a LOCAL

light is not lit, check that the Ethernet cable from the computer to the firewall is

securely attached at both ends, and that the computer is turned on.

Now, Configure the FVS114 for Internet Access

1. From the Ethernet connected PC you just set up, open a browser such as Internet Explorer or

Netscape® Navigator.

Power Internet Local Port 4Test

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 211 212

No comments

Netgear FVS114 User Manual Page 28