Netgear FVS114 User Manual download pdf (Page 36)

Reference Manual for the ProSafe VPN Firewall FVS114

3-12 Connecting the Firewall to the Internet

202-10098-01, April 2005

Account:

Enter your Account Name (may also be called Host Name) and Domain Name.

These parameters may be necessary to access your ISP’s services such as mail or news

servers.

b. Internet IP Address:

If your ISP has assigned you a permanent, fixed (static) IP address for your PC, select

“Use static IP address”. Enter the IP address that your ISP assigned. Also enter the

netmask and the Gateway IP address. The Gateway is the ISP’s firewall to which your

firewall will connect.

c. Domain Name Server (DNS) Address:

If you know that your ISP does not automatically transmit DNS addresses to the firewall

during login, select “Use these DNS servers” and enter the IP address of your ISP’s

Primary DNS Server. If a Secondary DNS Server address is available, enter it also.

Note: After completing the DNS configuration, restart the computers on your network so

that these settings take effect.

d. Firewall’s MAC Address:

This section determines the Ethernet MAC address that will be used by the firewall on the

Internet port. Some ISPs will register the Ethernet MAC address of the network interface

card in your PC when your account is first opened. They will then only accept traffic from

the MAC address of that PC. This feature allows your firewall to masquerade as that PC

by “cloning” its MAC address.

To change the MAC address, select “Use this Computer’s MAC address.” The firewall

will then capture and use the MAC address of the PC that you are now using. You must be

using the one PC that is allowed by the ISP. Or, select “Use this MAC address” and

enter it.

e. Click Apply to save your settings.

4. If your Internet connection does require a login, fill in the settings according to the instructions

below. Select Yes if you normally must launch a login program such as Enternet or WinPOET

in order to access the Internet.

Note: After you finish setting up your firewall, you will no longer need to launch the ISP’s

application, your firewall will automatically log you in.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 211 212

No comments

Netgear FVS114 User Manual Page 36