Netgear FVS114 User Manual Page 104

  • Download
  • Add to my manuals
  • Print
  • Page
    / 212
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 103
Reference Manual for the ProSafe VPN Firewall FVS114
6-16 Advanced Virtual Private Networking
202-10098-01, April 2005
The IKE Phase 2 parameters used in Scenario 1 are:
TripleDES
SHA-1
ESP tunnel mode
MODP group 2 (1024 bits)
Perfect forward secrecy for rekeying
SA lifetime of 3600 seconds (one hour) with no kilobytes rekeying
Selectors for all IP protocols, all ports, between 10.5.6.0/24 and 172.23.9.0/24, using IPv4
subnets
FVS114 Scenario 1: FVS114 to Gateway B IKE and VPN Policies
Note: This scenario assumes all ports are open on the FVS114. You can verify this by reviewing
the security settings as seen in the Figure 4-2 on page 4-4.
Figure 6-6: LAN to LAN VPN access from an FVS114 to an FVS114
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FVS114 labeled Gateway A as in the illustration.
Log in at the default address of http://192.168.0.1 with the default user name of admin and
default password of password, or using whatever password and LAN address you have
chosen.
2. Configure the WAN (Internet) and LAN IP addresses of the FVS114.
a. From the main menu Setup section, click the Basic Setup link to go back to the Basic
Settings menu.
FVS114
Gateway B
Scenario 1
14.15.16.17 22.23.24.25
WAN IP
WAN IP
172.23.9.1/2410.5.6.1/24
LAN IP
LAN IP
Gateway A
FVS114
Page view 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 211 212

Comments to this Manuals

No comments