Netgear FVS114 User Manual download pdf (Page 124)

Reference Manual for the ProSafe VPN Firewall FVS114

7-8 Maintenance

202-10098-01, April 2005

To restore the factory default configuration settings without knowing the login password or IP

address, you must use the reset button on the rear panel of the firewall. See “Restoring the Default

Configuration and Password” on page 9-7.

Changing the Administrator Password

The default password for the firewall’s Web Configuration Manager is password. NETGEAR

recommends that you change this password to a more secure password.

From the main menu of the browser interface, under the Maintenance heading, select Set Password

to bring up this menu.

Figure 7-7: Set Password menu

To change the password, first enter the old password, and then enter the new password twice. Click

Apply. To change the login idle timeout, change the number of minutes and click Apply.

Diagnostics

You can use the Diagnostics page to perform various diagnostics. For normal operation, these are

not required.

From the main menu of the browser interface, under the Maintenance heading, select Diagnostics

to bring up this menu.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 211 212

No comments

Netgear FVS114 User Manual Page 124