Netgear FVS114 User Manual download pdf (Page 134)

Reference Manual for the ProSafe VPN Firewall FVS114

8-8 Advanced Configuration

202-10098-01, April 2005

Figure 8-4: Reserved IP Address menu

In the IP Address box, type the IP address to assign to the PC or server.

(Choose an IP address from the firewall’s LAN subnet, such as 192.168.0.X.)

3. Type the MAC Address of the PC or server.

(Tip: If the PC is already present on your network, you can copy its MAC address from the

Attached Devices menu and paste it here.)

4. Click Apply to enter the reserved address into the table.

Note: The reserved address will not be assigned until the next time the PC contacts the firewall’s

DHCP server. Reboot the PC or access its IP configuration and force a DHCP release and renew.

To edit or delete a reserved address entry:

1. Click the button next to the reserved address you want to edit or delete.

2. Click Edit or Delete.

Configuring Static Routes

Static Routes provide additional routing information to your firewall. Under normal

circumstances, the firewall has adequate routing information after it has been configured for

Internet access, and you do not need to configure additional static routes. You must configure

static routes only for unusual cases such as multiple firewalls or multiple IP subnets located on

your network.

From the Main Menu of the browser interface, under Advanced, click on Static Routes to view the

Static Route table shown below.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 211 212

No comments

Netgear FVS114 User Manual Page 134