Netgear FVG318 User Manual Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Configuring Wireless Connectivity 3-9
v1.0, September 2007
7. For initial configuration and test, leave the Wireless Card Access List set to “All Wireless
Stations” and the Encryption Strength set to “Disable.”
8. Click Apply to save your changes.
9. Configure and test your PCs for wireless connectivity.
Program the wireless adapter of your PCs to have the same SSID that you configured in the
FVG318. Check that they have a wireless link and are able to obtain an IP address by DHCP
from the VPN firewall router.
Once your PCs have basic wireless connectivity to the VPN firewall router, then you can configure
the advanced options and wireless security functions.
Restricting Wireless Access by MAC Address
To restrict access based on MAC addresses, follow these steps:
1. Log in at the default LAN address of http://192.168.0.1 with the default user name of admin
and default password of password.
2. Select Network Configuration > Wireless Settings and click the Setup Access List link. The
Access Control List screen will display.
Note: If you are configuring the FVG318 from a wireless computer and you change
the VPN firewall router’s SSID, channel, or security settings, you will lose
your wireless connection when you click on Apply. You must then change the
wireless settings of your computer to match the FVG318’s new settings.
Figure 3-4
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 175 176

Comments to this Manuals

No comments