Netgear FVG318 User Manual Page 149

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 148
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Troubleshooting 9-7
v1.0, September 2007
Use the Reset button on the rear panel of the firewall. Use this method for cases when the
administration password or IP address are not known.
a. Press and hold the Reset button until the Test LED turns on and begins blinking (about 10
seconds).
b. Release the Reset button and wait for the firewall to reboot.
Problems with Date and Time
The E-Mail menu in the Content Filtering section displays the current date and time of day. The
VPN firewall uses the Network Time Protocol (NTP) to obtain the current time from one of
several Network Time Servers on the Internet. Each entry in the log is stamped with the date and
time of day. Problems with the date and time function can include:
Date shown is January 1, 2000. Cause: The firewall has not yet successfully reached a
Network Time Server. Check that your Internet access settings are configured correctly. If you
have just completed configuring the firewall, wait at least five minutes and check the date and
time again.
Time is off by one hour. Cause: The firewall does not automatically sense Daylight Savings
Time. In the E-Mail menu, check or uncheck the box marked Adjust for Daylight Savings
Time.
Page view 148
1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 175 176

Comments to this Manuals

No comments