Netgear FVG318 User Manual Page 137

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 136
ProSafe 802.11g Wireless VPN Firewall FVG318 Reference Manual
Advanced Configuration 8-7
v1.0, September 2007
When set to Both or In Only, it incorporates the RIP information that it receives.
When set to None, it will not send any RIP packets and ignores any RIP packets received.
3. Enable the RIP Version. This controls the format and the broadcasting method of the RIP
packets that the firewall sends. (It recognizes both formats when receiving.)
RIP-1 is universally supported. RIP-1 is probably adequate for most networks, unless you
have an unusual network setup.
RIP-2 carries more information.
RIP-2B uses subnet broadcasting.RIP-2B broadcasts data in the entire subnet.
RIP-2M sends data to multicast addresses.
4. If authentication is required for RIP 2B/2M:
Select the Yes radio box.
Input the MD-5 keys and Effective Start and End dates for the First and Second Keys for
MD5 based authentication between routers.
5. Click Apply.
Static Route Example
As an example of when a static route is needed, consider the following case:
Your primary Internet access is through a cable modem to an ISP.
Figure 8-5
Page view 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 175 176

Comments to this Manuals

No comments