Netgear FVG318 User Manual Page 151

  • Download
  • Add to my manuals
  • Print
  • Page
    / 176
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 150
Default Settings and Technical Specifications A-1
v1.0, September 2007
Appendix A
Default Settings and Technical Specifications
Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in below. (The Factory Default Restore button on the rear panel is shown in the illustration
“The FVG318 Rear Panel” on page 1-6.)
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
After you install the VPN firewall, use the procedures below to customize any of the settings to
better meet your networking needs.
Feature Default Behavior
Router Login
User Login URL http://192.168.0.1
User Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Use Default address
WAN MTU Size 1500
Port Speed AutoSense
Local Network (LAN)
Lan IP 192.168.0.1
Subnet Mask 255.255.255.0
RIP Direction None
RIP Version Disabled
RIP Authentication None
DHCP Server Enabled
Page view 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 175 176

Comments to this Manuals

No comments