Netgear DGND3300 User Manual Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
Chapter 6. Virtual Private Networking | 93
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
The VPN Wizard Summary screen displays:
To view the VPNC-recommended authentication and encryption settings used by the
VPN Wizard, click the here link.
5. Click Done on the Summary screen.
The VPN Policies screen displays, showing that the new tunnel is enabled.
Note: See Using Auto Policy to Configure VPN Tunnels on page 101 for
information about how to enable the IKE keep-alive capability on an
existing VPN tunnel.
6. Repeat these steps for the gateway on LAN B, and pay special attention to the following
network settings:
WAN IP of the remote VPN gateway (for example, 14.15.16.17)
LAN IP settings of the remote VPN gateway:
- IP address (for example, 192.168.0.1)
- Subnet mask (for example, 255.255.255.0)
- Pre-shared key (for example, 12345678)
7. Use the VPN Status screen to activate the VPN tunnel by performing the following steps:
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 176 177

Comments to this Manuals

No comments