Netgear DGND3300 User Manual Page 158

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 157
158 | Appendix C. NETGEAR VPN Configuration
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Verify that the firmware is up to date, and make sure you have all the addresses and
parameters to be set on both sides. Assure that there are no firewall restrictions.
Figure 73. Telecommuter Example
Setting Up Client-to-Gateway VPN (Telecommuter
Example)
Setting up a VPN between a remote PC running the NETGEAR ProSafe VPN client and a
network gateway involves two steps, described in the following sections:
Step 1: Configure Gateway A (VPN Router at Main Office) on page 159.
Step 2: Configure Gateway B (VPN Router at Regional Office) on page 160 describes
configuring the NETGEAR ProSafe VPN client endpoint.
Table 10. Configuration Summary (Telecommuter Example)
VPN Consortium Scenario Scenario 1
Type of VPN: PC/client-to-gateway, with client behind NAT router
Security scheme: IKE with pre-shared secret/key (not certificate based)
IP addressing:
Gateway Fully qualified domain name (FQDN)
Client Dynamic
Gateway A
(main office)
Gateway B
LAN IP
192.168.0.1
192.168.0.1/24
FQDN
ntgr.dyndns.org
“from_GW_A”
WAN IP
Internet
WAN IP
0.0.0.0
“toGW_A”
IP: 192.168.2.3
(regional office)
Client PC
(running NETGEAR
ProSafe VPN client)
Page view 157
1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 176 177

Comments to this Manuals

No comments