Netgear WG302v1 Application Note download pdf

WG302v2, WAG302v2 – DHCP: Use and Configuration

The WG302v2/WAG302v2 can act as a DHCP server for wireless client. The

WG302v2/WAG302v2 provides the pre-configured TCP/IP configuration for wireless clients

connected to the access point.

The WG302v2/WAG302v2 DHCP server only assigns network information to clients that connect

to the access point through security profiles that are on the same VLAN as security profile 1.

VLAN 1 is the default VLAN for all security profiles.

Enabling the DHCP server on the WG302v2/WAG302v2 causes Network Address

Translation (NAT) to be enabled on the access point - The WG302v2/WAG302v2 in this case

acts similar to a NAT router for the wireless clients who receive their network information from the

access point. All network traffics from the wireless client designated to the wired network are

NAT-ed to the access point’s LAN IP address.

As a result, the DHCP network (wireless network) configured in the WG302v2/WAG302v2 DHCP

settings must be in a different subnet than the wired network.

1 2 3

Summary of Contents

Page 1

WG302v2, WAG302v2 – DHCP: Use and Configuration The WG302v2/WAG302v2 can act as a DHCP server for wireless client. The WG302v2/WAG302v2 provide

Page 2 - WG302v2/WAG302v2

NETGEARInternet Access RouterFirewallLOCALPWR TEST1 2LNKINTERNETACT4100LNK/ACT3MODEL FR314Router192.168.0.1Wireless Clients 192.168.1.2-192.168.2.50Wi

Page 3

Wireless clients connect to the WG302v2/WAG302v2 will receive one of the addresses from the DHCP pool. However, DNS Server address assigned to the

Comments to this Manuals

No comments

Netgear WG302v1 Application Note

Browse online or download Application Note for Routers Netgear WG302v1. Netgear WG302v1 Application Note User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Routers Netgear WG302v1