Netgear DGND3300 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
Chapter 2. Wireless Settings | 31
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
To configure a wireless guest network:
1. In the main menu, under Setup, select either Wireless Guest Network g/b or Wireless
Guest Network a, n. A Wireless Guest Network Settings screen similar to the following
figure displays:
Figure 16.
2. Make sure that the Enable Guest Network check box is selected.
3. You can specify whether the SSID broadcast is enabled, and whether you want to allow
guests to access your local network.
4. You can also change the guest name in the Guest Wireless Network Name (SSID) field.
Note: NETGEAR strongly recommends that you change the default guest
network name (SSID) from the default name to a different name.
Note that the name is case-sensitive. For example, GuestNetwork is
not the same as Guestnetwork.
Up to 270 Mpbs Guest Network b/g/n NETGEAR-2.4G_n_Guest1 2.4GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
Up to 145 Mbps at 5 GHz & 54
Mbps at 2.4 GHz
Guest Network a/n NETGEAR-2.4G_n_Guest1 5GHz 802.11a
• 5GHz 802.11n
Guest Network b/g NETGEAR-2.4G_g_Guest1 2.4GHz 802.11g
• 2.4GHz 802.11b
Up to 145 Mbps at 2.4 GHz Guest Network a/n NETGEAR-2.4G_n_Guest1 2.4GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
Mode in Wireless Settings
Screen
Menu Selection Guest Network Default SSID Wireless
Compatibility
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 176 177

Comments to this Manuals

No comments