Netgear DGND3300 User Manual Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
Chapter 7. Advanced Settings (Part 1) | 125
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
2. In the Route Name field, type a name for this static route. (This is for identification purposes
only.)
3. Select the Private check box if you want to limit access to the LAN only. If Private is
selected, the static route is not reported in RIP.
4. Select the Active check box to make this route effective.
5. Type the destination IP address of the final destination.
6. Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
7. Type the gateway IP address, which must be a router on the same LAN segment as the
N300 wireless modem router.
8. Type a number between 1 and 15 as the metric value.
This represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
9. Click Apply to have the static route entered into the table.
Wireless Repeating (Also Called WDS)
The N300 Wireless Modem Router can be used with a wireless access point (AP) to build
large bridged wireless networks. Wireless repeating is a type of Wireless Distribution System
(WDS).
WARNING!
If you use the wireless repeating function, your options for
wireless security are limited to None or WEP. For more
information about wireless security, see Chapter 2, Wireless
Settings.
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 176 177

Comments to this Manuals

No comments