Netgear DGND3300 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
Chapter 3. Security Settings | 41
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
4. Click Apply to have your changes take effect.
The new rule will be listed in the table when you return to the Firewall Rules screen.
Port Forwarding
Using the port forwarding feature, you can allow certain types of incoming traffic to reach
servers on your local network. For example, you might make a local Web server, FTP server,
or game server visible and available to the Internet.
Use the Port Forwarding screen to configure the N300 wireless modem router to forward
specific incoming protocols to computers on your local network. In addition to servers for
specific applications, you can also specify a default DMZ server to which all other incoming
protocols are forwarded. The DMZ server is configured in the WAN Setup screen, as
discussed in Configuring the WAN Setup Options on page 117.”
Before starting, you need to determine which type of service, application, or game you will
provide, and the local IP address of the computer that will provide the service. Be sure the
computer’s IP address never changes.
Select Security > Port Forwarding in the main menu. The Port Forwarding screen displays:
Figure 22.
WAN Servers These settings determine which Internet locations are covered by the rule, based on their
destination (WAN) IP address. Select the option you want:
Any. All local IP addresses are covered by this rule.
Address range. If this option is selected, you must fill in the Start and Finish fields.
Single address. Enter the required address in the Start fields.
Log This determines whether packets covered by this rule are logged. Select the action you
want:
Always. Always log traffic considered by this rule, whether it matches or not. This is
useful when debugging your rules.
Never. Never log traffic considered by this rule, whether it matches or not.
Match. Log traffic only if matches this rule. (The action is determined by this rule.)
Not Match. Log traffic that is considered by this rule, but does not match. (The action is
not determined by this rule.)
Field Outbound Rules Inbound Rules
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 176 177

Comments to this Manuals

No comments