Netgear DGND3300 User Manual Page 155

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 154
Appendix C. NETGEAR VPN Configuration | 155
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
To establish VPN connectivity, Gateway A must be configured to use Dynamic DNS, and
Gateway B must be configured to use a DNS host name provided by a DDNS service
provider to find Gateway A. Again, the following step-by-step procedures assume that you
have already registered with a DDNS service provider and have the configuration information
necessary to set up the gateways.
Step-by-Step Configuration
1. Log in to Gateway A (your N300 wireless modem router) as described in Logging In to
Your N300 Wireless Modem Router on page 8.
This example assumes that you have set the local LAN address as 10.5.6.1 for Gateway
A and have set your own password.
2. On Gateway A, configure the Dynamic DNS settings.
a. Under Advanced, select Dynamic DNS.
b. Fill in the fields with account and host name settings.
Select the Use a Dynamic DNS Service check box.
In the Host Name field, type dgnd3300v2.dyndns.org.
In the User Name field, enter the account user name.
In the Password field, enter the account password.
c. Click Apply.
d. Click Show Status. The resulting screen should show Update OK: good:
Page view 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 176 177

Comments to this Manuals

No comments