Netgear DGND3300 User Manual Page 97

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 96
Chapter 6. Virtual Private Networking | 97
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Once the connection is established, you can open a browser on the PC and enter the
LAN IP address of the remote N300 Wireless Dual Band ADSL2+ Modem Router
DGND3300v2. After a short wait, you should see the login screen of the N300 wireless
modem router (unless another PC already has the N300 Wireless Dual Band ADSL2+
Modem Router DGND3300v2 management interface open).
Gateway-to-gateway configuration. Test the VPN tunnel by pinging the remote network
from a PC attached to Gateway A (the N300 wireless modem router).
a. Open a command prompt (for example, Start > Run > cmd).
b. Type ping 192.168.3.1.
Note: The pings might fail the first time. If they do, then try the pings a
second time.
Start Using a VPN Tunnel to Activate It
To use a VPN tunnel, use a Web browser to go to a URL whose IP address or range is
covered by the policy for that VPN tunnel.
Verifying the Status of a VPN Tunnel
To use the VPN Status screen to determine the status of a VPN tunnel:
1. Log in to the N300 wireless modem router.
2. On the main menu, select VPN Status to display the VPN Status/Log screen.
Page view 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 176 177

Comments to this Manuals

No comments