Netgear DGND3300 User Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
20 | Chapter 2. Wireless Settings
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
3. Select the region in which the N300 wireless modem router will operate.
4. For initial configuration and test, leave the other settings unchanged.
5. To save your changes, click Apply.
6. Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same SSID and wireless
security settings as your N300 wireless modem router. Check that they have a wireless
link and are able to obtain an IP address by DHCP from the N300 wireless modem router.
If there is interference, adjust the channel.
Configuring WEP Wireless Security
Note: If you use a wireless computer to configure wireless security
settings, you will be disconnected when you click Apply.
Reconfigure your wireless computer to match the new settings, or
access the N300 wireless modem router from a wired computer to
make further changes.
11N Channel
11G Channel
The wireless channel fields determine the operating frequency used for the 11N
or 11G wireless networks. Do not change the wireless channel unless you
experience interference (shown by lost connections or slow data transfers). If
this happens, you might need to experiment with different channels to see which
is the best.
Security Options Disable. You can use this setting to establish wireless connectivity before
implementing wireless security. NETGEAR strongly recommends that you
implement wireless security.
WEP (Wired Equivalent Privacy). Use encryption keys and data encryption for
data security. Select 64-bit or 128-bit encryption. See
Configuring WEP
Wireless Security on page 20.
• WPA-PSK (Wi-Fi Protected Access Pre-Shared Key). Allow only computers
configured with WPA to connect to the N300 wireless modem router.
• WPA2-PSK (Wi-Fi Protected Access with 2 Pre-Shared Keys). Allow only
computers configured with WPA2 to connect to the N300 wireless modem
router.
Mixed WPA-PSK + WPA2-PSK. Allow computers configured with either
WPA-PSK or WPA2-PSK security to connect to the N300 wireless modem
router.
WPA-802.1x.
For information about WPA or WPA2 configuration, see
Configuring WPA,
WPA2, or Mixed WPA2 + WPA Wireless Security on page 22.
WPA2-PSK Security
Encryption
Network Key (8–63 characters).
Settings Description
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 176 177

Comments to this Manuals

No comments