Netgear DGND3300 User Manual Page 111

  • Download
  • Add to my manuals
  • Print
  • Page
    / 177
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 110
Chapter 6. Virtual Private Networking | 111
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Local LAN IP Address
The remote VPN
endpoint must have
these IP addresses
entered as its remote
addresses.
Subnet Mask Enter the network mask.
Single PC - no
Subnet
Select this option if there is no LAN (only a single PC) at the
remote endpoint. If this option is selected, no additional data is
required.
Single/Start IP
Address
The IP address for a single address, or the starting address for
an address range used on the LAN. If you want to make a single
server on your LAN available to remote users, use a single
address settings.
Any. The remote VPN endpoint can be at any IP address.
Finish IP
Address
For an address range, enter the finish IP address. This must be an
address range used on your LAN.
Subnet Mask Enter the network mask.
Remote LAN IP Address
The remote VPN
endpoint must have
these IP addresses
entered as its local
addresses.
IP Address Single PC - no Subnet. Select this option if there is no LAN (only
a single PC) at the remote endpoint. If this option is selected, no
additional data is required. The typical application is a PC running
the VPN client at the remote end.
Single/Start IP
Address
• Enter an IP address on the remote LAN. You can use this setting
to access a server.
• For a range of addresses, enter the starting IP address. This
must be an address range used on the remote LAN.
Any. Any outgoing traffic from specified Local IP computers
triggers an attempted VPN connection to the remote VPN
endpoint. Be sure you want this option before selecting it.
Finish IP
Address
Enter the finish IP address for a range of addresses. This must be
an address range used on the remote LAN.
Subnet Mask Enter the network mask.
ESP Configuration
ESP (Encapsulating
Security Payload)
provides security for the
payload (data) sent
through the VPN tunnel.
SPI Enter the required Security Policy Indexes (SPIs). Each policy
must have unique SPIs. These settings must match the remote
VPN endpoint. The in setting here must match the out setting on
the remote VPN endpoint, and the out setting here must match the
in setting on the remote VPN endpoint.
Encryption Select an encryption algorithm, and enter the key in the field
provided. For 3DES, the keys should be 24 ASCII characters, and
for DES, the keys should be 8 ASCII characters.
DES. The Data Encryption Standard (DES) processes input data
that is 64 bits wide, encrypting these values using a 56-bit key.
Faster but less secure than 3DES.
3DES. (Triple DES) achieves a higher level of security by
encrypting the data three times using DES with three different,
unrelated keys.
Authentication
Table 7. VPN Manual Policy Fields and Settings (Continued)
Fields and Settings Description
Page view 110
1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 176 177

Comments to this Manuals

No comments