Netgear AC750 User Manual download pdf (Page 47)

genie ADVANCED Home

A750 Wireless Dual Band Gigabit Router JR6150

2. Select ADVANCED > Setup > WAN Setup.

3. In the MTU Size field, enter a new size from 64 through 1500.

4. Click Apply.

LAN Setup

You can configure LAN IP services such as Dynamic Host Configuration Protocol (DHCP)

and Routing Information Protocol (RIP).

The router is shipped preconfigured to use private IP addresses on the LAN side and to act

as a DHCP server. The router’s default LAN IP configuration includes the following settings:

• LAN IP address. 192.168.1.1

• Subnet mask. 255.255.255.0

These addresses are part of the designated private address range

for use

in private networks

and should be suitable for most applications. If your network requires the use of a different IP

addressing scheme, make the changes in the LAN Setup screen.

Note: If you change the LAN IP address of the router while connected

through the browser, you are disconnected. You must open a new

connection to the new IP address and log in again.

 To change the LAN settings:

1. Log in to the router.

For more information, see Use NETGEAR genie after Installation

on page 17.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 158 159

No comments

Netgear AC750 User Manual Page 47