Netgear AC750 User Manual download pdf (Page 29)

genie BASIC Settings

A750 Wireless Dual Band Gigabit Router JR6150

 To change the WPA wireless security option and password:

1. Log in to the router.

For more information, see Use NETGEAR genie after Installation on page 17.

2. Select BASIC > W

ireless Settings.

3. In the Security Options section, select one of the WPA options with PSK.

4. In the associated Passphrase field, enter the password that you want to use.

The password is a text string from 8 to 63 ASCII characters or exactly 64 hexadecimal

digits. A hexadecimal digit is one of the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,

A–F

, or a–f.

Wireless clients must use the password to access the wireless network through the

router.

5. Click the Apply

button.

WPA/WPA2 Enterprise

This security option is not for home use but is typically used in a business or enterprise.

WPA/WPA2 Enterprise does not use a password but supports 802.1x authentication, which

requires an internal or external RADIUS server. A Remote Authentication Dial In User

Service (RADIUS) server provides Authentication, Authorization, and Accounting (AAA)

management to grant (or deny) computers access to your wireless network.

WPA/WPA2 Enterprise can support WPA [TKIP] for WPA clients only,

WPA2

[AES] for WPA2

clients only, and WPA [TKIP] + WPA2 [AES]. WPA [TKIP] + WPA2 [AES] is a combination of

TKIP and AES encryption for both WPA and WPA2 clients. WPA clients are supported at

speeds of up to 54 Mbps only. WPA2 clients are supported at speeds of up 300 Mbps.

WPA/WPA2 Enterprise supports five Extensible Authentication Protocol (EAP) authentication

methods:

EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,

and EAP-SIM.

 To configure WPA/WPA2 Enterprise security:

1. Log in to the router.

For more information, see Use NETGEAR genie after Installation

on page 17.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 158 159

No comments

Netgear AC750 User Manual Page 29