genie BASIC Settings
24
A750 Wireless Dual Band Gigabit Router JR6150
Internet Setup
You can view or change ISP information.
To set up your Internet connection:
1. Log in to the router.
For more information, see Use NETGEAR genie after Installation
on page 17.
2. Select BASIC > Internet
.
3. Select one of the following radio buttons:
• Yes. Select the encapsulation method and enter the login name. If you want to
change the login time-out, enter a new value in minutes.
• No
. Enter the account and domain names, only if needed.
These fields display when no login is required:
• Account Name (If required). Enter the account name provided by your ISP
. This
might also be called the host name.
• Domain Name (If required)
. Enter the domain name provided by your ISP.
These fields display when your ISP requires a login:
• Internet Service Provider. Select PPPoE, L2TP, or
PPTP.
• Login.
The login name provided by your ISP. This login name is often an email
address.
• Password. The password that you use to log in to your ISP.
• Service Name (if Required)
. If your ISP provided a service name, enter it here.
• Connection Mode. Select Always On, Dial on Demand, or Manually Connect.
• Idle T
imeout (In minutes). If you want to change the login time-out, enter a new
value in minutes. This setting determines how long the router k
eeps the Internet
Comments to this Manuals