Advanced Settings
135
A750 Wireless Dual Band Gigabit Router JR6150
9. Type the gateway IP address, which must be a router on the same LAN segment as the
A750 Wireless Dual Band Gigabit Router.
10. Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1
.
11. Click the Apply button.
The route is added to the table on the Static Routes screen.
To edit or delete a static route:
1. Log in to the router.
For more information, see Use NETGEAR genie after Installation
on page 17.
2. Select ADVANCED >
Advanced Setup > Static Routes.
3. In the table, select the radio button next to the route that you want to edit or delete.
Comments to this Manuals