Netgear AC750 User Manual Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 159
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
genie ADVANCED Home
45
A750 Wireless Dual Band Gigabit Router JR6150
Forwarding/Port Triggering screen. Instead of discarding this traffic, you can forward it to one
computer on your network. This computer is called the default DMZ server.
To set up a default DMZ server:
1. Log in to the router.
For more information, see Use NETGEAR genie after Installation
on page 17.
2. Select ADVANCED >
Setup > WAN Setup.
3. Select the Default DMZ Server check box.
4. Type the IP address.
5. Click Apply.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits.
When one network device communicates across the Internet with another, the data packets
travel through many devices along the way. If any device in the data path has a lower MTU
setting than the other devices, the data packets must be split or “fragmented” to
accommodate the device with the smallest MTU.
The best MTU setting for NETGEAR equipment is often just the default value, and changing
the
value might
fix one problem but cause another. Leave the MTU unchanged unless one of
these situations occurs:
You have problems connecting to your ISP or other Internet service, and the technical
support of either the ISP or NETGEAR recommends changing the MTU setting.
These
web-based applications might require an MTU change:
- A secure website that does not open, or displays only part of a web page
- Y
ahoo email
- MSN portal
- America Online’
s DSL service
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 158 159

Comments to this Manuals

No comments