Netgear WNDR4000 User Manual Page 22
- Page / 104
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
22 | Chapter 2. Set Up Your Internet Connection
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Telstra Bigpond. This setting is only for older cable modem service accounts that still
require a Bigpond login utility. Telstra has discontinued this type of account. Those with
Telstra DSL accounts and newer cable modem accounts should select No for Does your
Internet connection require a login?.
Other. This is the default setting. It is for PPPoE (Point to Point Protocol over Ethernet),
the protocol used by most DSL services worldwide.
• Login. The login name provided by your ISP. This is often an e-mail address.
• Password. The password provided by your ISP.
• Service Name. If your ISP provided a service name, enter it here.
• Connection Mode. Specify when the router will connect to and disconnect from the
Internet.
Always On. The router logs in to the Internet immediately after booting and never
disconnects.
Dial on Demand. The router logs in only when outgoing traffic is present and logs out
after the idle time-out.
Manually Connect. The router logs in or logs out only when you click Connect or
Disconnect in the Router Status screen.
• Idle Timeout. If you want to change the Internet login time-out, enter a new value in
minutes. This determines how long the wireless router keeps the Internet connection
active after there is no Internet activity from the LAN. Entering an Idle Timeout value of 0
(zero) means never log out.
• Internet IP Address
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
Use Static IP Address. Enter the IP address that your ISP assigned. Also enter the IP
subnet mask and the gateway IP address. The gateway is the ISP’s wireless router to
which your wireless router will connect.
Domain Name and MAC Address Fields
• Domain Name Server (DNS) Address. The DNS server is used to look up site
addresses based on their names.
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP
automatically assigns this address.
Use These DNS Servers. If you know that your ISP does not automatically transmit DNS
addresses to the wireless router during login, select this option, and enter the IP address
of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it
also.
• Router MAC Address. The Ethernet MAC address that will be used by the wireless
router on the Internet port. Some ISPs register the Ethernet MAC address of the network
interface card in your computer when your account is first opened. They will then accept
- N750 Wireless Dual Band 1
- Gigabit Router WNDR4000 1
- Trademarks 2
- Contents 3
- Chapter 6 USB Storage 4
- Chapter 7 Advanced Settings 5
- Chapter 8 Troubleshooting 5
- 6 6
- Hardware Setup 7
- Unpack Your Wireless Router 8
- Hardware Features 8
- Back Panel 10
- Position Your Router 11
- Cable Your Router 12
- Verify the Cabling 13
- Replace an Existing Router 16
- Gather ISP Information 16
- Log In to the Router 17
- Upgrade Firmware 18
- Router Interface 18
- Setup Wizard 19
- Manual Setup (Basic Settings) 20
- No ISP Login 21
- ISP Login 21
- Change Password 23
- Log Out Manually 24
- Types of Logins 24
- Wireless Settings 25
- Security Basics 26
- Disable SSID Broadcast 27
- Manual Method 27
- WPS Button Method 28
- Router Interface Method 28
- Wireless Settings Screen 29
- Security Options Settings 31
- Wireless Guest Networks 32
- Content Filtering Settings 34
- Examples of Log Messages 36
- Delete Keyword or Domain 37
- Block Services 38
- Set the Time Zone 40
- Schedule Services 41
- Port Forwarding 43
- Add a Custom Service 44
- Port Triggering 46
- Ending Port fields 48
- Network Maintenance 49
- Upgrade the Firmware 50
- Manage the Configuration File 52
- View Router Status 53
- LAN Port (Local Ports) 54
- Wireless Port 54
- Show Statistics 54
- Connection Status 55
- View Attached Devices 56
- USB Storage 57
- USB Drive Requirements 58
- File-Sharing Scenarios 58
- USB Storage Basic Settings 59
- Edit a Network Folder 60
- USB Storage Advanced Settings 61
- Access Method 62
- Available Network Folders 62
- Unmount a USB Drive 63
- Approved USB Devices 64
- Advanced Settings 67
- WAN Setup 68
- Default DMZ Server 69
- Dynamic DNS 70
- LAN Setup 71
- LAN Setup Screen Settings 72
- IP Address Reservation 72
- Quality of Service (QoS) 73
- Advanced Wireless Settings 75
- WPS Settings 76
- Wireless Card Access List 76
- Remote Management Access 77
- Static Routes 79
- Add a Static Route 80
- Universal Plug and Play 81
- Traffic Meter 82
- Advanced USB Settings 84
- Figure 2. Repeater example 86
- Troubleshooting 88
- Quick Tips 89
- Troubleshooting with the LEDs 90
- Wireless LED Is Off 91
- Cannot Access the Internet 92
- Changes Not Saved 93
- Incorrect Date or Time 93
- Wireless Connectivity 94
- Supplemental Information 95
- Feature Default Behavior 96
- Technical Specifications 97
- Notification of Compliance 98
- Industry Canada 99
- Caution: 99
- Interference Reduction Table 100
- Index 101
- 102 102
- Index 103
- 104 104
Related products and manuals for Routers Netgear WNDR4000
Routers Netgear DG834 Operations Instructions
(142 pages)
(142 pages)
Routers Netgear D6200 User Manual
(162 pages)
(162 pages)
Routers Netgear DGB111G Operations Instructions
(268 pages)
(268 pages)
Routers Netgear R6200 User Manual
(131 pages)
(131 pages)
Routers Netgear WNB1100 User Manual
(122 pages)
(122 pages)
Routers Netgear N300 ROUTER WNR2000 User Manual
(146 pages)
(146 pages)
© 2020, manymanuals.com. All rights reserved. | 0.169 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals