80 | Chapter 7. Advanced Settings
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Add a Static Route
1. Select Advanced > Static Routes.
The following screen displays:
2. Click Add to open the following screen.
3. Fill in the fields:
• In
the Route Name field, enter a route name for this static route. This name is for
identification purpose only.
• Select Private if you want
to limit access to the LAN only. The static route will not be
reported in RIP.
• Select Active to make
this route effective.
• Ente
r the destination IP address of the final destination.
• Ente
r the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255.
• Enter t
he gateway IP address, which has to be a router on the same LAN segment as
the wireless router.
• In
the Metric field, enter a number between 2 and 15 as the metric value. This
represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works.
4. Click Apply to
save your changes.
Comments to this Manuals