Netgear WNDR4000 User Manual download pdf (Page 77)

Chapter 7. Advanced Settings | 77

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

the wireless router from a wired computer or from a wireless computer that is on the access

control list. The following screen displays:

4. If a wireless station that you want to add is connected to the network, select it from the

Available Wireless Cards list and click Add.

5. Y

ou can enter MAC addresses manually. The MAC address is usually printed on the

wireless computer or device, or it might be in the wireless router’s DHCP table. The MAC

address is 12 hexadecimal digits.

You can copy and paste the MAC addresses from the wireless router’s Attached Devices

screen (see View Attached Devices on

page 56) into the MAC Address field. This screen

shows computers connected to the network.

6. Click App

ly to save your settings.

Remote Management Access

The remote management feature allows you to upgrade or check the status of your

WNDR4000 router over the Internet.

Note: Be sure to change the router’s default configuration password to a

very secure password. The ideal password should contain no

dictionary words from any language, and should be a mixture of

letters (both uppercase and lowercase), numbers, and symbols.

Your password can be up to 30 characters.

To configure your router for remote management:

1. Select Adv

anced > Remote Management.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 103 104

No comments

Netgear WNDR4000 User Manual Page 77