Netgear WNDR4000 User Manual download pdf (Page 20)

20 | Chapter 2. Set Up Your Internet Connection

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Note: The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol

(PPTP) connection. If your ISP uses PPTP, you have to set your

Internet connection through the screen described in

Manual Setup

(Basic Settings) on page 20.

Manual Setup (Basic Settings)

The Basic Settings screen displays when you select No. I want to configure the router myself

in the Setup Wizard and is also available from the wireless router menu. It is where you view

or change ISP information. The fields that display vary depending on whether or not your

Internet connection requires a login.

Note: Check that the country is set as described Setup Wizard on page 19

before proceeding with the manual setup.

1. Select Set Up > Basic Settings, and select Yes or No depending on whether or not

your ISP requires a login.

• Yes. Select the encapsulation method and enter the login name. If you want to

change the login time-out, enter a new value in minutes.

• No. Enter the account and domain names, as needed.

2. Enter the settings for the IP address and DNS server.

The default DSL settings usually work fine. If you have problems with your connection,

check the DSL settings, and see

Unsuccessful Internet Connection on page 23 for more

information.

3. If no login is required, you can specify the MAC Address setting.

4. Click Apply to save your settings.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

No comments

Netgear WNDR4000 User Manual Page 20