Netgear WNDR4000 User Manual download pdf (Page 85)

Chapter 7. Advanced Settings | 85

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Select Advanced > Wireless Repeating Function to display the following screen:

The process is the same for the 2.4 GHz or 5 GHz wireless network.

• Ena

ble Wireless Repeating Function (2.4 GHz/5 GHz). Select the check box for the 2.4

GHz or 5 GHz network to use the wireless repeating function.

• W

ireless MAC of this router. This field displays the MAC address for your wireless

router for your reference. You will need to enter this MAC address in the corresponding

Wireless Repeating Function screen of the other access point you are using.

• W

ireless Repeater. If your wireless router is the repeater, select this check box.

• Repeate

r IP Address. If your wireless router is the repeater, enter the IP address of the

other access point.

• Disable

Wireless Client Association. If your wireless router is the repeater, selecting

this check box means that wireless clients cannot associate with it. Only LAN client

associations are allowed.

- I

f you are setting up a point-to-point bridge, select this check box.

- I

f you want all client traffic to go through the other access point (repeater with wireless

client association), leave this check box cleared.

• Base S

tation MAC Address. If your wireless router is the repeater, enter the MAC

address for the access point that is the base station.

• W

ireless Base Station. If your wireless router is the base station, select this check box.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 103 104

No comments

Netgear WNDR4000 User Manual Page 85