Netgear WNDR4000 User Manual download pdf (Page 12)

12 | Chapter 1. Hardware Setup

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

• Away from any large metal surfaces, such as a solid metal door or aluminum studs. Large

expanses of other materials such as glass, insulated walls, fish tanks, mirrors, brick, and

concrete can also affect your wireless signal.

• With the

antennas in a vertical position to provide the best side-to-side coverage or in a

horizontal position to provide the best up-and-down coverage, as applicable.

When you use multiple access points, it is better if ad

jacent access points use different radio

frequency channels to reduce interference. The recommended channel spacing between

adjacent access points is 5 channels (for example, use Channels 1 and 6, or 6 and 11).

Cable Your Router

The installation guide that came in the box has a cabling diagram on the first page. This

section walks you through cabling with detailed illustrations.

1. Connect the wire

less router, the computer, and the modem.

2. T

urn off and unplug the modem. If your modem has a backup battery, remove it as well.

3. Loca

te the Ethernet cable (1) that connects your computer to the modem.

Figure 4. Disconnect the modem from your computer

4. Disconnect the cable from the modem (2). You will connect it to the router later.

5. Loca

te the Ethernet cable that came with the NETGEAR product.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

No comments

Netgear WNDR4000 User Manual Page 12