Netgear WNDR4000 User Manual download pdf (Page 53)

Chapter 5. Network Maintenance | 53

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Restore

1. Enter the full path to the file on your network, or click the Browse button to find the file.

2. When you have located th

e .cfg file, click the Restore button to upload the file to the

wireless router.

Upon completion, the wireless router reboots.

Erase

Click the Erase button to reset the wireless router to its factory default settings. Erase sets

the password to password, and the LAN IP address to 192.168.1.1, and enables the wireless

router’s DHCP.

View Router Status

Select Maintenance > Router Status to display

this screen. The Router Status screen provides

status and usage information.

Hardware and Firmware Version. The model

of the hardware and the currently running

firmware version.

GUI Language Version. The current

ly selected

language.

Internet Port Settings

MAC Address. The Ethernet MAC address of

the DSL port.

IP Address. The

DSL port IP address. If no

address is shown, the wireless router cannot

connect to the Internet.

DHCP.

Usually this is set to DHCP Client

because the router obtains an IP address

dynamically from the ISP. If set to None, the

router uses a fixed IP address on the WAN.

IP Subnet Mask. Th

e DSL port IP subnet mask.

Gateway IP Address. The

IP address used as a gateway to the Internet for computers

configured to use DHCP.

Domain Name Server. The wireless rou

ter DNS server IP addresses. These addresses are

usually obtained dynamically from the ISP.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 103 104

No comments

Netgear WNDR4000 User Manual Page 53