Netgear 7300S User Manual Page 321

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 320
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Managing Switch Stacks 12-7
202-10088-01, March 2005
Effects of Replacing a Preconfigured Switch in a Switch Stack
When a preconfigured switch in a switch stack fails, is removed from the stack, and is replaced
with another switch, the stack applies either the preconfiguration or the default configuration to it.
The events that occur when the switch stack compares the configuration with the preconfigured
switch are the same as those described in “Effects of Adding a Preconfigured Switch to a Switched
Stack” on page 12-6.
Effects of Removing a Preconfigured Switch from a Switch Stack
If you remove a preconfigured switch from the switch stack, the configuration associated with the
removed stack member remains in the running configuration as configured information. To
completely remove the configuration, use the no member unit_number (this is in the stacking
configuration mode).
Table 12-1. Results of comparing the preconfiguration with the new switch
Scenario Result
The stack member numbers and the switch types
match.
If the stack member number of the preconfigured
switch matches the stack member number in the
configuration on the stack, and
If the switch type of the preconfigured switch
matches the switch type in the configuration on
the stack.
The switch stack applies the configuration to the
preconfigured new switch and adds it to the stack.
The stack member numbers match but the switch
types do not match.
If the stack member number of the preconfigured
switch matches the stack member number in the
configuration on the stack, but
The switch type of the preconfigured switch does
not match the switch type in the configuration on
the stack.
The switch stack applies the default configuration
to the preconfigured switch and adds it to the
stack.
The configuration in the preconfigured switch is
changed to reflect the new information.
The stack member number is not found in the
configuration.
The switch stack applies the default configuration
to the new switch and adds it to the stack.
The preconfigured information is changed to
reflect the new information.
The stack member number of the preconfigured
switch is not found in the configuration.
The switch stack applies the default configuration to
the preconfigured switch and adds it to the stack.
Page view 320
1 2 ... 316 317 318 319 320 321 322 323 324 325 326 ... 401 402

Comments to this Manuals

No comments