Netgear 7300S User Manual Page 123

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 122
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-53
202-10088-01, March 2005
Format no vlan port pvid all
Mode Global Config
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging
is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
Format
vlan port tagging all <1-4094>
Mode Global Config
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging
is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification
number.
Format
no vlan port tagging all
Mode Global Config
vlan protocol group
This command adds protocol-based VLAN group to the system. The <groupName> is a character string of 1 to 16
characters. When it is created, the protocol group will be assigned a unique number that will be used to identify the
group in subsequent commands.
Format vlan protocol group <groupname>
Mode Global Config
vlan protocol group add protocol
This command adds the <protocol> to the protocol-based VLAN identified by <groupid>. A group may have more than
one protocol associated with it. Each interface and protocol combination can only be associated with one group. If
adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command will
fail and the protocol will not be added to the group. The possible values for protocol are
ip, arp, and ipx.
Default none
Format
vlan protocol group add protocol <groupid> <protocol>
Page view 122
1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 401 402

Comments to this Manuals

No comments