Netgear 7300S User Manual Page 241

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 240
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Routing Commands 10-7
202-10088-01, March 2005
The current value for this function is displayed under "show ip interface" labeled as "Routing
Mode".
Default
disabled
Format routing
Mode
Interface Config
no routing
This command disables routing for an interface.
The current value for this function is displayed under "show ip interface" labeled as "Routing
Mode".
Format
no routing
Mode
Interface Config
ip routing
This command enables the IP Router Admin Mode for the master switch.
Format
ip routing
Mode Global Config
no ip routing
This command disables the IP Router Admin Mode for the master switch.
Format
no ip routing
Mode Global Config
ip address
This command configures an IP address on an interface. The IP address may be a secondary IP
address.
The value for <ipaddr> is the IP Address of the interface.
The value for <subnetmask> is a 4-digit dotted-decimal number which represents the Subnet Mask
of the interface. This changes the label "IP address" in "show ip interface."
Format
ip address <ipaddr> <subnetmask> [secondary]
Page view 240
1 2 ... 236 237 238 239 240 241 242 243 244 245 246 ... 401 402

Comments to this Manuals

No comments