Netgear 7300S User Manual Page 175

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 174
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Switching Commands 8-105
202-10088-01, March 2005
Mode Privileged EXEC
Mac Address A unicast MAC address for which the switch has forwarding and or filtering
information. The format is 6 or 8 two-digit hexadecimal numbers that are sepa-
rated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address will be displayed as 8 bytes.
Type This displays the type of the entry. Static entries are those that are configured by
the end user. Dynamic entries are added to the table as a result of a learning pro-
cess or protocol.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering
(Flt:).
Internet Group Management Protocol (IGMP) Commands
This chapter provides a detailed explanation of the IGMP commands. The commands are divided
into two functional groups:
Show commands display switch settings, statistics, and other information.
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
set igmp
This command enables IGMP Snooping on the system. The default value is disable.
Note: The IGMP application supports the following:
Global configuration or per interface configuration. Per VLAN configuration is unsupported
in the IGMP snooping application.
Validation of the IP header checksum (as well as the IGMP header checksum) and discarding
of the frame upon checksum error.
Maintenance of the forwarding table entries based on the MAC address versus the IP address.
Flooding of unregistered multicast data packets to all ports in the VLAN.
Format
set igmp
Mode Global Config
Page view 174
1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 401 402

Comments to this Manuals

No comments