Netgear 7300S User Manual Page 160

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 159
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
8-90 Switching Commands
202-10088-01, March 2005
Format netbios-node-type <type>
Mode DHCP Pool Config
no netbios-node-type
This command removes the NetBIOS node Type.
Format no netbios-node-type
Mode DHCP Pool Config
next-server
This command configures the next server in the boot process of a DHCP client.
Address is the IP address of the next server in the boot process, which is typically a Trivial File
Transfer Protocol (TFTP) server.
Default
If the next-server command is not used to configure a boot server list, the DHCP
Server uses inbound interface helper addresses as boot servers.
Format next-server <address>
Mode DHCP Pool Config
no next-server
This command removes the boot server list.
Format no next-server
Mode DHCP Pool Config
option
The command configures DHCP Server options. Code specifies the DHCP option code. Ascii
string specifies an NVT ASCII character string. ASCII character strings that contain white space
must be delimited by quotation marks. Hex string specifies hexadecimal data. in hexadecimal
character strings is two hexadecimal digits—each byte can be separated by a period, colon, or
white space.
Example :a3:4f:22:0c / a3 4f 22 0c / a34f.220c.9fed The <address> specifies an IP address.
Default
none
Page view 159
1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 401 402

Comments to this Manuals

No comments