Netgear 7300S User Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
Administration Console Interface 3-3
202-10088-01, March 2005
4.
When the following screen appears, make sure that the port setting are as follows:
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Figure 3-4: Connection Settings
5.
Click OK.
The HyperTerminal window will open and you should be connected to the switch. If you do not
get a welcome screen or a system menu, press the return key.
When attached to the User Interface via a console connection, the following must be set in order to
use the arrow keys: Under the terminal pull down menu, choose Properties and make sure the
VT100 Arrows option is turned on.
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 401 402

Comments to this Manuals

No comments