Netgear 7300S User Manual download pdf (Page 193)

User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software

Switching Commands 8-123

202-10088-01, March 2005

If the ‘external-cost’ token is specified, this command sets the external-path cost for MST instance

‘0’ i.e. CIST instance. The external pathcost can be specified as a number in the range of 1 to

200000000 or auto. If "auto" is specified, the external pathcost value will be set based on Link

Speed.

If the ‘port-priority’ token is specified, this command sets the priority for this port within a specific

multiple spanning tree instance or the common and internal spanning tree instance, depending on

the <mstid> parameter. The port-priority value is a number in the range of 0 to 240 in increments

of 16.

Default cost : auto; external-cost : auto; port-priorty : 128

Format spanning-tree mst <mstid> {{cost <1-200000000> | auto

} |

{external-cost <1-200000000> | auto }| port-priority

<0-240>}

Mode Interface Config

no spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree

instance or in the common and internal spanning tree to the respective default values. If the

<mstid> parameter corresponds to an existing multiple spanning tree instance, then the

configurations are done for that multiple spanning tree instance. If however 0 (defined as the

default CIST ID) is passed as the <mstid>, then the configurations are performed for the common

and internal spanning tree instance.

If the ‘cost’ token is specified, this command sets the path cost for this port within a multiple

spanning tree instance or the common and internal spanning tree instance, depending on the

<mstid> parameter, to the default value, i.e. a pathcost value based on the Link Speed.

If the ‘external-cost’ token is specified, this command sets the external path cost for this port for

mst ‘0’ instance, to the default value, i.e. a pathcost value based on the Link Speed.

If the ‘port-priority’ token is specified, this command sets the priority for this port within a specific

multiple spanning tree instance or the common and internal spanning tree instance, depending on

the <mstid> parameter, to the default value, i.e. 128.

Format no spanning-tree mst <mstid> <cost | external-cost |

port-priority>

Mode Interface Config

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 401 402

No comments

Netgear 7300S User Manual Page 193